Product Introduction This sand dryer machine is dedicated drying equipment customized for dry mortar production lines. With a rotary drum design, it takes hot air as the heat medium to continuously dry river sand, quartz sand, manufactured sand and other aggregate raw materials for mortar production...
sand dryer machine for mortar line
,industrial sand dryer equipment
,sand drying machine for production
This sand dryer machine is dedicated drying equipment customized for dry mortar production lines. With a rotary drum design, it takes hot air as the heat medium to continuously dry river sand, quartz sand, manufactured sand and other aggregate raw materials for mortar production.
Wet sand enters the drum from the feeding inlet. As the cylinder rotates, built-in lifting flights lift and disperse the sand repeatedly, enabling full contact between sand grains and high-temperature hot airflow. Moisture is evaporated and discharged, while dried sand with stable moisture content is delivered from the discharge outlet. It supports 24-hour continuous production with large throughput and stable running. Besides dry mortar raw sand treatment, it is also widely used for drying granular materials in building materials, mining and chemical industries.
- Customized for dry mortar plants Perfectly coordinate with batching, mixing and packaging units of dry mortar lines. It precisely controls sand moisture, stabilizing the quality of finished mortar and avoiding cracking, poor fluidity and other defects caused by unstable sand humidity.
- High thermal efficiency & energy-saving design Optimized flight structure achieves uniform material scattering and sufficient heat exchange. The drum is equipped with heat preservation layers, and waste heat recovery system is optional. Multiple heating sources are available including coal, biomass, natural gas and diesel hot blast stoves.
- Durable structure & low maintenance cost Thickened drum body, high wear-resistant liners and heavy-duty riding wheels guarantee long-time continuous operation. The failure rate is low, and daily maintenance is simple to reduce production downtime.
- Closed dust removal system, eco-friendly It can be connected with cyclone dust collectors and bag dust collectors to form a fully enclosed drying circuit, effectively controlling dust emission and meeting local environmental protection standards.
- Wide adjustable range Drum rotating speed, hot air temperature and feeding speed can be adjusted flexibly. It adapts to sand with different initial moisture and can meet various capacity requirements.
| Item | Parameter |
|---|---|
| Model | Φ1.2*8m / Φ1.5*10m / Φ1.8*12m / Φ2.0*14m |
| Drum Diameter | 1200–2000 mm |
| Drum Length | 8–14 m |
| Sand Processing Capacity | 3–25 t/h (depending on raw sand moisture) |
| Inlet Moisture of Sand | ≤15% |
| Outlet Moisture of Sand | 0.5%–2% (adjustable for dry mortar) |
| Drum Rotation Speed | 3–6 r/min |
| Main Motor Power | 11–55 kW |
| Optional Heating Source | Coal / Biomass / Natural gas / Fuel oil hot blast stove |
| Driving Type | Gear drive / Friction drive |
| Working Mode | Continuous drying |
- Before startup, check riding wheels, gears, sealing parts and feeding & discharging chutes, and make sure no foreign matter inside the drum.
- Preheat the dryer completely before feeding sand. Never feed cold wet sand directly, otherwise sand will stick to the drum wall and cause blockage.
- Keep stable and even feeding. Sudden overfeeding will lead to overload and insufficient drying.
- Check the abrasion of lifting flights and wear liners regularly. Replace worn spare parts in time to keep good drying performance.
- Maintain the dust removal system periodically to prevent pipeline blockage. Keep negative pressure inside the drum to prevent dust leakage.
- Once abnormal vibration, strange noise or sharp temperature fluctuation appears, stop feeding first and shut down the machine for inspection.
- Operators must receive professional training and operate strictly according to the operation manual and safety rules.
- Dry mortar production lines: drying river sand, quartz sand and manufactured sand for plastering mortar, waterproof mortar, self-leveling mortar, tile adhesive and grout.
- Building material industry: drying aggregates, slag and limestone powder.
- Mining industry: drying mineral sand and tailings.
- Chemical industry: drying granular chemical raw materials.
Q1: Is this sand dryer suitable for dry mortar production?
A1: Yes. This machine is specially developed for drying sand used in dry mortar lines. It can stabilize the final sand moisture at 0.5%–2% to meet mortar production requirements.
Q2: How do I choose the right model?
A2: Model selection depends on your required output, initial sand moisture, heating source and workshop layout. Our engineers will recommend the suitable machine and match supporting hot blast stove and dust removal system.
Q3: What heating options can I choose?
A3: We provide multiple heating solutions: coal-fired hot blast stove, biomass burner, natural gas hot blast stove and diesel burner. We will suggest the most cost-effective option based on local energy prices.
Q4: Is this sand dryer hard to maintain?
A4: It adopts mature and reliable structure. The main wearing parts are lifting flights and liners, which are easy to purchase and replace. We supply operation manuals and professional after-sales technical support.
Q5: Can you supply the full set of dry mortar production line together with this sand dryer?
A5: Certainly. We can provide integrated dry mortar plant solutions, including sand drying, screening, batching, mixing, packing and conveying equipment.