Product Introduction Our rotary dryer is a continuous rotary drum drying equipment specially developed for dry mortar production lines. It is mainly used to dry river sand, quartz sand, slag, fly ash and other aggregates required for dry-mixed mortar. Wet materials enter the inclined rotating ...
rotary dryers for dry mortar
,industrial rotary dryers manufacturers
,dry mortar production line dryers
Our rotary dryer is a continuous rotary drum drying equipment specially developed for dry mortar production lines. It is mainly used to dry river sand, quartz sand, slag, fly ash and other aggregates required for dry-mixed mortar. Wet materials enter the inclined rotating cylinder and make full contact with hot flue gas. With the cooperation of lifting plates, materials are continuously lifted and cascaded inside the drum to complete heat exchange and moisture removal.
Featuring stable operation, large throughput and strong material adaptability, the dryer can be integrated with hot blast stoves, dust collectors, belt conveyors, vibrating screens and batching systems to form a complete drying station. As the core front-end equipment of dry mortar plants, it helps manufacturers obtain low-moisture qualified sand aggregates and guarantees consistent quality of finished mortar products.
- Mortar-sand dedicated combined lifting plates Optimized internal lifting structure effectively prevents sand sticking and agglomeration. Materials are dispersed evenly in hot airflow to boost heat utilization and cut energy consumption compared with conventional rotary dryers.
- Intelligent temperature and moisture linkage control Real-time monitoring of inlet & outlet material temperature, exhaust temperature and final moisture content. The system automatically adjusts feeding speed and hot air volume to stabilize sand moisture within 0.5%–1%, fully complying with dry mortar production standards.
- Heavy wear-resistant cylinder and upgraded sealing Cylinder lining and lifting plates are made of wear-resistant alloy. Labyrinth plus flexible composite sealing is adopted at both drum ends to reduce hot air leakage, improve thermal efficiency and suppress dust overflow.
- Low failure rate and easy maintenance Reserved large inspection manholes for convenient overhaul. Riding wheels, supporting rollers and gear rings adopt heavy-duty configurations to support long-term continuous operation in mortar factories; wearing parts can be replaced quickly.
- Eco-friendly dust suppression design Reserved standard interfaces for pulse bag dust collectors. Optimized airflow velocity reduces fine sand carryover and emission concentration to meet local environmental protection standards.
- Modular and customizable structure Customized solutions are available according to the output of customers’ mortar lines, including single-cylinder, double-cylinder and three-cylinder types. It simplifies on-site layout and installation.
| Item | Parameter |
|---|---|
| Model | Φ1.2*10m / Φ1.5*12m / Φ1.8*14m / Φ2.0*16m / Φ2.2*18m |
| Processing Capacity (Wet Sand) | 5–35 t/h |
| Initial Moisture | 8%–18% |
| Final Moisture | 0.5%–1% (adjustable) |
| Drum Rotation Speed | 1–4 r/min |
| Inlet Hot Air Temperature | 450–750 ℃ |
| Main Motor Power | 11–55 kW |
| Total Weight | 12–78 t |
| Optional Heat Source | Coal-fired hot blast stove, biomass burner, natural gas burner, oil burner |
| Suitable Materials | River sand, quartz sand, slag, limestone, fly ash and other raw aggregates for dry mortar |
Custom specifications are acceptable based on raw material properties, target output and workshop space.
- Follow the correct startup sequence: turn on the exhaust fan and dust removal system first, then start the rotary drum, hot blast stove and feeder. Reverse the sequence for shutdown. Never feed cold wet materials if the drum stops rotating.
- Do not exceed the rated hot air temperature. Overheating may damage liners and lifting plates, and raise fire risks when combustible admixtures exist.
- Maintain uniform feeding. Sudden overfeeding leads to material accumulation, blockage and unstable outlet moisture. Remove iron impurities in advance to avoid damage to internal components.
- Carry out regular lubrication and inspection for riding wheels, supporting rollers, gear rings and bearing seats. Check sealing for air leakage and monitor the wear condition of lifting plates periodically.
- Keep the dust collector running during production. Clean filter bags on schedule. Blocked bags will cause positive pressure inside the drum, hot gas leakage and poor drying performance.
- Keep flammable substances away from hot air pipelines and the dryer outlet. Operators need professional training. Shut down the machine immediately once abnormal vibration, strange noise or smoke is found.
- Dry-mixed mortar production lines (bonding mortar, plastering mortar, thermal insulation mortar, floor self-leveling mortar, waterproof mortar aggregate drying)
- Sand processing plants and manufactured sand / quartz sand production
- Pretreatment of slag, fly ash and mineral powder for building materials
- Drying of construction aggregates and lightweight aggregates
- Supporting facilities for sand washing lines, batching plants and aggregate processing systems
A: Our rotary dryer is specially optimized for drying mortar sand. The anti-sticking lifting design and precise moisture control can steadily meet the strict moisture requirement of dry mortar raw sand, and match the whole mortar batching system better.
A: Yes. With stable feeding and stable heat supply, the outlet moisture can be controlled steadily within your required range, normally 0.5%–1%. We will tailor the technical solution according to your sand type and initial moisture.
A: Multiple options are available, including natural gas, diesel, coal and biomass pellet burners. We will recommend the most cost-effective solution according to local fuel prices and environmental regulations.
A: We can provide a standalone rotary dryer, or a full turnkey drying system equipped with a hot blast stove, feeder, conveyor, dust collector, induced draft fan, control cabinet, connecting pipelines and on-site installation guidance.
A: Standard models take 15–30 working days. The lead time for large customized units depends on drawing confirmation. The main host comes with a 12-month warranty (excluding consumable parts such as lifting plates and sealing strips). We provide long-term technical support and overseas installation guidance.
A: Yes. The main drum can run outdoors. However, the control cabinet, burner and dust collector need rain protection. We can supply rain shelter designs and foundation drawings for your project site.