Product Introduction Our sand dryer is specially engineered for dry mortar production lines, designed to remove moisture from river sand, quartz sand, manufactured sand and other mineral aggregates. Wet sand enters the inclined rotating drum and makes full contact with high-temperature hot air. With ...
sand dryers for mortar lines
,industrial sand drying equipment
,dry mortar sand dryer machine
Our sand dryer is specially engineered for dry mortar production lines, designed to remove moisture from river sand, quartz sand, manufactured sand and other mineral aggregates. Wet sand enters the inclined rotating drum and makes full contact with high-temperature hot air. With the lifting plates inside the cylinder, sand is continuously lifted, scattered and cascaded, achieving efficient heat exchange and dehydration.
As the core pretreatment equipment for dry mix mortar plants, this sand dryer features stable operation, large processing capacity and strong adaptability. It can form a complete drying system when matched with hot blast stove, dust collector, belt conveyor, vibrating screen and batching system. It reliably provides low-moisture qualified sand aggregate and stabilizes the quality of finished mortar.
- Anti-sticking lifting structure exclusive for sand Optimized combined lifting plates avoid sand caking and sticking on the cylinder wall. Sand is uniformly dispersed in the hot airflow, greatly improving heat utilization and cutting energy consumption compared with ordinary sand dryers.
- Intelligent temperature & moisture linkage control system Real-time monitoring of inlet and outlet material temperature, exhaust temperature and final sand moisture. The system automatically adjusts feeding rate and hot air volume to keep outlet moisture stable within 0.5%–1%, fully satisfying the strict standard of dry mortar raw sand.
- Heavy-duty wear-resistant design & upgraded sealing Lifting plates and inner liners are made of high wear-resistant alloy. Labyrinth plus flexible composite double sealing is adopted at both ends of the drum to reduce hot air leakage, boost thermal efficiency and control dust overflow.
- Low failure rate and convenient daily maintenance Large inspection manholes are reserved for easy overhaul. Riding wheels, supporting rollers and gear rings adopt heavy-duty configuration to support long-time continuous running for mortar factories. Wearing parts can be replaced quickly.
- Eco-friendly dust reduction structure Standard reserved interfaces for pulse bag dust collectors. Optimized internal air velocity reduces fine sand carryover and dust emission, complying with local environmental protection regulations.
- Modular and customizable layout Available in single-cylinder, double-cylinder and three-cylinder versions. We customize the dryer according to your required output, raw material condition and workshop space for easy installation and layout.
| Item | Parameter |
|---|---|
| Model | Φ1.2*10m / Φ1.5*12m / Φ1.8*14m / Φ2.0*16m / Φ2.2*18m |
| Processing Capacity (Wet Sand) | 5–35 t/h |
| Initial Moisture of Sand | 8%–18% |
| Final Outlet Moisture | 0.5%–1% (adjustable) |
| Drum Rotating Speed | 1–4 r/min |
| Hot Air Inlet Temperature | 450–750 ℃ |
| Main Motor Power | 11–55 kW |
| Total Equipment Weight | 12–78 t |
| Optional Heat Source | Coal-fired hot blast stove, biomass burner, natural gas burner, diesel burner |
| Applicable Materials | River sand, quartz sand, manufactured sand, slag, limestone, fly ash and other aggregates for dry mortar |
Custom non-standard sizes are supported based on your raw material characteristics, target capacity and site constraints.
- Follow the correct startup sequence: start the induced draft fan and dust removal system first, then start the drum, hot blast stove and feeder. Shut down in reverse order. Never feed wet sand when the drum stops rotating.
- Do not exceed the rated hot air temperature. Excessive high temperature will damage liners and lifting plates and bring fire hazards if flammable additives are mixed in materials.
- Maintain even and stable feeding. Sudden overload feeding will cause material accumulation, blockage and unstable outlet moisture. Remove iron impurities in advance to prevent damage to internal components.
- Carry out regular lubrication and inspection for riding wheels, supporting rollers, gear rings and bearing seats. Check sealing positions for air leakage and regularly inspect the wear degree of lifting plates.
- The dust collector must keep running during production. Clean filter bags periodically. Blocked filter bags will lead to positive pressure inside the drum, hot gas leakage and poor drying effect.
- Keep flammable materials away from hot air pipelines and dryer discharge outlet. Operators must receive professional training. Shut down the machine immediately once abnormal vibration, strange noise or smoke occurs.
- Dry-mixed mortar production lines (bonding mortar, plastering mortar, thermal insulation mortar, self-leveling mortar, waterproof mortar aggregate drying)
- Sand processing plants, manufactured sand and quartz sand production lines
- Pretreatment of slag, fly ash and mineral powder for building materials
- Drying of construction aggregates and lightweight aggregates
- Supporting equipment for sand washing lines, concrete batching plants and aggregate processing systems
A: Our sand dryer is specially optimized for drying mortar sand. The anti-sticking lifting design and precise moisture control can steadily meet the strict moisture requirement of dry mortar raw sand, and it has better matching performance with the whole mortar batching system.
A: Yes. With stable feeding and stable heat supply, the outlet moisture can be steadily controlled within your required range, normally 0.5%–1%. We will customize the technical solution according to your sand type and initial moisture.
A: Multiple heat sources are optional, including natural gas, diesel, coal and biomass pellet burners. We will recommend the most cost-effective solution according to local fuel prices and environmental policies.
A: We can provide standalone sand dryer host, or full turnkey drying system including hot blast stove, feeder, conveyor, dust collector, induced draft fan, control cabinet, connecting pipelines and on-site installation guidance.
A: Standard models take 15–30 working days. Lead time for large customized units depends on drawing confirmation. The main host enjoys a 12-month warranty (excluding consumable parts such as lifting plates and sealing strips). We provide long-term technical support and overseas installation guidance.
A: The main drum can work outdoors. However, the control cabinet, burner and dust collector need rainproof protection. We can provide rain cover design and foundation drawings for your project site.