Product Introduction The Rotary Steam Dryer is an indirect heat transfer rotary drying machine independently developed for dry mix mortar production lines. Using saturated steam as the heat source, it is equipped with densely arranged steam heat exchange tubes inside the cylinder. Heat is transferre...
rotary steam dryer for mortar
,industrial rotary steam dryer
,continuous rotary steam dryer
The Rotary Steam Dryer is an indirect heat transfer rotary drying machine independently developed for dry mix mortar production lines. Using saturated steam as the heat source, it is equipped with densely arranged steam heat exchange tubes inside the cylinder. Heat is transferred to materials through tube walls for gentle dehydration and drying.
Different from traditional direct-fired hot air dryers, there is no open flame and no hot flue gas directly contacting materials. It features controllable drying temperature and low dust emission. It is widely used for drying quartz sand, river sand, manufactured sand, fly ash, slag and other aggregate materials for mortar.
Raw materials are fed into the inclined rotating cylinder. As the cylinder rotates at a low speed, materials are continuously tumbled and conveyed forward. Saturated steam flows into the internal heat exchange tube bundles and transfers heat to the materials. Water vapor is discharged from the exhaust port, while dried qualified materials are discharged from the outlet, ready for screening, storage and batching processes. It serves as the core main machine for aggregate pretreatment in complete dry mix mortar production lines.
✅ Indirect Steam Heating, No Contamination to Aggregates Steam does not come into direct contact with materials. No flue gas or carbon black impurities are generated. The dried sand aggregates remain clean and will not affect the strength, water retention and color of finished mortar, making it ideal for high-demand formulations such as colored decorative mortar, self-leveling mortar and tile adhesive.
✅ Flexible Temperature Control, Avoid Overheating and Material Degradation Drying temperature can be precisely adjusted by changing steam pressure, feeding rate and cylinder rotating speed. The drying process is mild without sand particle bursting or pulverization. Aggregate gradation stays stable, effectively reducing excess fine powder.
✅ High Thermal Efficiency & Lower Energy Consumption Dense heat exchange tube bundles provide large heat transfer area. Thickened cylinder insulation reduces heat loss. Under the same final moisture requirement, it achieves lower comprehensive energy consumption compared with direct hot air dryers, bringing obvious cost advantages for long-term operation.
✅ Perfect Compatibility with Continuous Mortar Production Lines It can be seamlessly connected with bucket elevators, vibrating screens, silos and dust collection systems for continuous stable output. It suits small, medium and large-scale dry mix mortar plants and supports automatic linkage and DCS centralized control.
✅ Low Dust & High Operational Safety Without open flame combustion system, fire and explosion risks are greatly reduced. A reserved independent dust removal interface cuts the dust load of downstream dust collectors and meets environmental emission standards.
✅ Durable Structure & Convenient Maintenance The cylinder and heat exchange tubes adopt wear-resistant and anti-corrosion materials to adapt to the severe abrasion condition of sand materials. Reasonably arranged access doors and cleaning ports facilitate regular removal of scaling and sticky materials on tube surfaces. Heavy-duty transmission components support 24-hour continuous operation.
| Item | Specification |
|---|---|
| Product Name | Rotary Steam Dryer |
| Processed Materials | River sand, manufactured sand, quartz sand, slag, fly ash and other mortar aggregates |
| Capacity | 3–30 t/h (Based on inlet moisture: 8%–12%; outlet moisture: ≤0.5%) |
| Heat Source | Saturated steam |
| Working Steam Pressure | 0.4–1.0 MPa (Normal range: 0.6–0.8 MPa) |
| Final Outlet Moisture | ≤0.5% (Adjustable to meet dry mix mortar standards) |
| Cylinder Rotating Speed | 1–4 r/min, frequency control |
| Installation Inclination | 1.5°–3.5° |
| Driving System | Variable frequency motor + reducer + riding wheel friction drive / gear drive |
| Heat Exchange Structure | Multi-layer internal steam tube bundles, indirect heat transfer |
| Insulation | Aluminum silicate insulation cotton + outer protective steel plate |
| Connection Ports | Feed inlet, discharge outlet, steam inlet & condensate outlet, exhaust & dust port, access port |
| Working Mode | Continuous feeding & continuous discharging |
| Control System | Local control cabinet; available for integration with whole-line automation |
Note: Actual output is affected by initial moisture content, particle gradation and steam pressure. Custom design is available according to your production capacity, site layout and boiler conditions.
- Pre-start Inspection Check steam pipelines, valves and steam traps for leakage. Lubricate riding wheels, thrust wheels and transmission parts. Ensure the dust collection system is ready. Never start the machine without dust removal equipment.
- Correct Preheating Procedure Preheat the cylinder with steam first. Start feeding only after stable operating temperature is reached. Avoid feeding large quantities into a cold cylinder, which will cause material sticking and blockage.
- Stable Feeding Maintain uniform and continuous feeding. Sudden surge or interruption of feedstock should be avoided. For raw materials with fluctuating moisture, install a homogenizing device in advance to stabilize outlet moisture.
- Steam Pipeline Maintenance Check steam traps regularly to drain condensate water. Remove scale from heat exchange tubes periodically, as scale will greatly reduce heat transfer efficiency and increase power and steam consumption.
- No Overpressure Operation Operate strictly within the designed steam pressure range. Do not increase steam pressure without authorization. Calibrate safety valves and pressure gauges on schedule.
- Standard Shutdown Process Stop feeding first. Keep the cylinder rotating until internal materials are fully discharged, then shut off the steam gradually. Do not carry out maintenance until the cylinder cools down completely to prevent high-temperature injury and cylinder deformation.
- Regular Inspection of Wearing Parts Riding wheels, thrust wheels, sealing parts and outer surfaces of heat exchange tubes are vulnerable to wear. Carry out routine inspection and replace worn components timely.
- Safety Protection Keep away from the rotating cylinder during operation. Repair damaged insulation layers to prevent scalds. Ensure good workshop ventilation to discharge water vapor.
- Complete dry mix mortar production lines: masonry mortar, plastering mortar, floor mortar, waterproof mortar and thermal insulation mortar
- Special mortar projects: colored decorative mortar, self-leveling cement, grouting material, repair mortar and tile adhesive
- Sand processing plants: drying manufactured sand and quartz sand supplied to mortar factories and building material enterprises
- Solid waste recycling: pretreatment of slag, steel slag and fly ash as mortar admixtures
- Factories with strict environmental requirements: sites where open-flame direct heating is restricted
- Renovation projects for existing mortar plants equipped with steam boilers
A: If you require high cleanliness and stable color of aggregates and have an existing steam boiler, the Rotary Steam Dryer is your priority. Indirect heating avoids smoke contamination and ensures consistent mortar quality. Hot air dryers are suitable for customers with limited budget, no steam supply and less strict requirements on sand appearance.
A: With stable steam pressure and uniform feeding, the moisture of mortar sand can be steadily controlled below 0.5% to satisfy dry mix mortar batching requirements. It can also be adjusted to 1%–2% according to your process demand.
A: This model is specially designed for saturated steam heating, so it is not recommended without steam supply. We can provide alternative rotary hot air dryer solutions upon request.
A: Yes. It adopts variable frequency drive and reserves signal interfaces to connect with feeding, screening, silo level monitoring, dust collection and central control system to realize automatic operation of the full line.
A: Common reasons include fast feeding into cold cylinder, high moisture or sticky raw materials, improper inclination or rotating speed, and scaling on heat exchange tubes. Solutions: stop feeding, empty the cylinder, clean sticky materials, adjust rotating speed and feed rate, and follow the standard preheating workflow.
A: Yes. Besides the Rotary Steam Dryer, we provide overall layout design for dry mix mortar plants and supporting equipment including elevators, screens, dust collectors, silos and batching systems. Our engineers can go onsite for installation, commissioning and operator training.