Product IntroductionThe dry mix batching plant is an integrated automatic production line specially designed for mixing dry powder materials. It realizes automatic batching, conveying, mixing, storage and packaging of raw materials such as cement, sand, lime, mineral powder, additives and pigments. ...
Dry Mix Batching Plant
,Dry Mortar Production Line
,Dry Mix Batching Equipment
The dry mix batching plant is an integrated automatic production line specially designed for mixing dry powder materials. It realizes automatic batching, conveying, mixing, storage and packaging of raw materials such as cement, sand, lime, mineral powder, additives and pigments. This equipment is widely used to produce ordinary masonry mortar, plastering mortar, floor mortar, waterproof mortar, tile adhesive, grout, putty powder and other dry mortar products.
Our dry mix batching plant adopts modular design. It can be configured as a simple semi-automatic type or a fully automatic intelligent production line according to customer output requirements. With compact layout, stable operation and low dust emission, it helps customers realize standardized, large-scale and continuous dry mortar production and reduce manual dependence and production cost.
- High-precision Automatic Batching System Equipped with independent weighing modules for different raw materials; weight sensor + PLC control ensures high batching accuracy, effectively avoiding material proportion deviation and guaranteeing stable finished mortar quality.
- Efficient Double-shaft Mixer Adopts gravity-free double-shaft mixing host. Short mixing cycle, uniform mixing, no dead zone, and good adaptability for trace additives, fibers and pigments.
- Modular & Flexible Layout Free combination of silos, conveying, mixing and packing units. It can adapt to factory buildings of different sizes, and support expansion of silos, automatic packing and palletizing modules later.
- Dust Reduction & Environmental Protection Design Matching pulse bag dust collectors and sealed conveying pipelines. Low dust leakage during feeding, mixing and discharging, which meets local environmental protection emission standards.
- Intelligent PLC Control System Touch screen operation, formula storage, production data recording, fault alarm and one-click start-stop. Operators can switch different mortar formulas quickly.
- Low Operation & Maintenance Cost Key wearing parts are made of wear-resistant alloy; the whole line runs smoothly with low failure rate, convenient maintenance and long service life.
| Item | Parameter |
|---|---|
| Production Capacity | 5–30 t/h (customizable) |
| Batching Accuracy | Main material ±0.5%; Additive ±0.2% |
| Mixer Type | Gravity-free double-shaft mixer |
| Mixing Time | 60–120 s per batch |
| Raw Material Silo | 2–6 silos (customizable volume: 30–100 m³) |
| Control Mode | PLC + touch screen automatic control |
| Power Supply | 380V/50Hz or customized |
| Total Installed Power | 35–120 kW (depends on configuration) |
| Packing Option | Valve bag automatic packer / bulk loader |
| Working Environment | -10℃ ~ +45℃ |
| Overall Dimension | Customized according to site layout |
- Operators must receive professional training before running the equipment and strictly follow the operation manual.
- Check all fasteners, sealing parts, sensors, lubrication points and dust removal system before starting up every day.
- Hard impurities such as iron blocks and stones are forbidden to enter the mixer to prevent damage to mixing blades and lining plates.
- Do not open the mixer access cover during operation. Cut off the power supply completely before entering the mixing chamber for inspection or cleaning.
- Keep the raw materials dry. Wet materials will cause arching, bridging and blockage inside silos and screw conveyors.
- Regularly clean the dust collector bags; replace damaged filter bags timely to maintain dust collection efficiency.
- Perform regular lubrication for bearings, reducers and transmission parts according to the maintenance schedule.
- In case of abnormal vibration, strange noise or alarm, stop the machine immediately for inspection. Do not run the plant under fault status.
- Equip the workshop with fire prevention devices. Keep flammable additives stored separately away from heat sources.
- Dry mortar production factory: masonry mortar, plaster mortar, self-leveling floor mortar, repair mortar
- Building chemical materials: tile adhesive, grout, waterproof putty, interface agent, crack filler
- Construction & precast industry: precast component special mortar
- Powder material mixing: mineral powder, filler, industrial dry powder blending
- Engineering project site: mobile dry mix plant for large construction sites
A: Yes. We provide customized lines from small 5t/h workshop-type plants to large automatic lines of 30t/h or higher. We design the configuration according to your target output, product types and factory space.
A: It can produce almost all common dry-mix products, including ordinary building mortar, tile adhesive, grout, self-leveling mortar, putty powder, waterproof mortar, repair mortar and other powder formulas.
A: The PLC touch screen system supports saving multiple formulas. Workers only need to select the formula and start the line after training. The system will complete batching, mixing and discharging automatically, with real-time fault prompts.
A: We provide installation guidance, commissioning, operator training and after-sales technical support. Spare parts can be supplied on demand.
A: Normally 25–45 working days, subject to the configuration and order schedule. We will confirm the delivery time before signing the contract.
A: Yes. We can configure valve bag packing machine and bulk cement loader at the same time to meet both bagged and bulk delivery demands.