industrial rotary drum dryer

industrial rotary drum dryer
Basic Properties
Country Of Origin
Shandong, China
Brand Name
Qingchi
Certificate
ISO,CE
PRODUCT MODEL
QC4000
Trading Properties
MOQ
1
Unit Price
50000-250000
Payment Method
L/C,T/T
Product Summary

Product Introduction This industrial rotary drum dryer is core drying equipment specially configured for dry mixed mortar production lines. It is mainly used to dry river sand, quartz sand and other aggregate raw materials of mortar. With a slightly inclined rotating cylinder and built-in lifting ...

Product Details
Highlight:

industrial rotary drum dryer

,

rotary drum dryer for mortar

,

dry mortar rotary drum dryer

Weight: 6t
Mixing Power: 30kw
Equipment Material: Customization
Mixingmethod: Forced Mixing
Workshop Area: 600-800m2
Workshop Area Requirement: 300-500 M2
Finalproductpackaging: Automatic Packing Machine Compatible
Packing Method: Valve Packing Or Open Packing
Production Line Area: 100 M2
Mixer Volume: 3300*1050*2100(mm)
Suitable For: Powder Materials,Paste
Hourly Output: 15-150 Tons Per Hour
Discharge: Discharge 1.5m
Workshop Required: 600-800 M2
Capacity: 1-20 Tons Per Hour
Product Description
Product Introduction

This industrial rotary drum dryer is core drying equipment specially configured for dry mixed mortar production lines. It is mainly used to dry river sand, quartz sand and other aggregate raw materials of mortar. With a slightly inclined rotating cylinder and built-in lifting plates, the equipment continuously lifts and cascades materials to form a uniform material curtain. Hot air conducts full heat exchange with the materials, and moisture is evaporated and discharged, realizing continuous, stable and automatic drying. The finished dried sand has stable moisture, which effectively guarantees the mixing quality and storage stability of finished dry mortar and avoids mortar caking and performance fluctuation caused by excessive raw material moisture. It can be matched with complete dry mortar production systems, supporting co-current or counter-current heat exchange mode according to customer process requirements.

Core Highlights
  1. Stable Drying Performance for Mortar Aggregate Optimized lifting blade layout, uniform material dispersion. The final moisture can be stably controlled at 0.5%–1%, perfectly matching the moisture standard required for dry mortar raw sand and preventing finished mortar from agglomeration.
  2. High Thermal Efficiency & Energy Saving Optional triple-pass nested drum structure, good heat preservation effect, thermal efficiency up to 70%–80%, fuel consumption reduced by 30%–40% compared with traditional single-drum dryers, lower running cost for mortar plants.
  3. Multiple Heat Source Options Compatible with natural gas, diesel, coal, biomass, heavy oil and other heating modes, adapting to different energy conditions of factories in various regions.
  4. Heavy-Duty Wear-Resistant Structure The contact parts with sand adopt wear-resistant alloy steel. The lifting plates are anti-abrasion and easy to replace, long service life, suitable for long-term continuous operation of mortar production lines with high abrasion of sand materials.
  5. Intelligent & Easy Operation Equipped with PLC control and frequency conversion drive system. Drum speed, feeding volume and hot air temperature can be adjusted automatically according to the incoming sand moisture; supporting local control and remote monitoring.
  6. Environment-Friendly Dust Treatment Support matched cyclone dust collector + pulse bag filter system, effectively collect dust generated during drying, meet industrial emission standards and improve workshop environment.
  7. Strong Compatibility & Customization Support customized diameter, length and capacity; can be docked with feeding conveyor, screening machine, sand silo and other equipment of dry mortar production line to form a complete closed sand drying system.
Specification Parameters
Item Parameter
Model RD Series (Customizable)
Processing Capacity 3–120 t/h (based on raw sand moisture)
Drum Diameter Φ1.0m–Φ3.0m
Drum Length 8m–25m
Rotating Speed 2–10 r/min (VFD adjustable)
Inlet Raw Sand Moisture 5%–20%
Discharged Sand Moisture 0.5%–1.0% (adjustable)
Heat Source Natural gas / Diesel / Coal / Biomass / Heavy Oil
Main Motor Power 5.5–75 kW
Working Mode Continuous operation
Heat Exchange Type Co-current / Counter-current optional
Main Material Q235 carbon steel / Wear-resistant alloy steel
Voltage 380V / 415V / Customized 50/60Hz
Certificate ISO9001, CE available
Operation Notes
  1. Before startup, check all connecting bolts, supporting rollers, riding wheels, sealing parts and transmission system; remove sundries inside the drum, confirm that the lubrication of each lubrication point is sufficient.
  2. Start the induced draft fan and dust removal system first, then start the dryer host and feeding system; stop feeding first when shutting down, keep the drum rotating and hot air supply for a period of time until materials inside the drum are completely discharged, then stop heating and main machine to avoid material caking inside the drum.
  3. Strictly control the inlet hot air temperature. Over-high temperature will cause sand overheating and damage the internal lifting plates; over-low temperature will lead to unqualified moisture of finished sand and affect mortar quality.
  4. Regularly check the wear condition of lifting plates, replace severely worn parts in time to avoid uneven material curtain and reduced drying efficiency.
  5. All rotating parts, hot surface and dust removal pipeline are high-risk areas. Operators must wear PPE; lockout-tagout (LOTO) must be implemented during maintenance and overhaul, and no hot work is allowed in the dust area without protection measures.
  6. Check the sealing device frequently to prevent cold air leakage, which will reduce thermal efficiency and increase energy consumption.
  7. Do not feed materials with large blocks, iron blocks and impurities; avoid blocking the drum or damaging internal components.
  8. Regularly clean the dust collector ash hopper and filter bag to ensure stable exhaust and dust removal effect.
Application Scenarios
  • Dry mixed mortar production line: drying raw river sand, quartz sand for masonry mortar, plastering mortar, tile adhesive, putty powder and self-leveling mortar
  • Building materials industry: drying slag, fly ash, mineral powder and other mortar admixtures
  • Foundry industry: drying foundry sand
  • Mining & mineral processing: drying granular mineral aggregates
  • Other granular material drying projects with low moisture requirement
FAQ
Q1: What moisture of sand can this dryer reach for dry mortar production?

A1: Normally it can stably control final moisture at 0.5%–1%, which meets the standard requirement of dry mortar raw sand. If you have stricter moisture requirements, we can optimize the heating system and drum structure for customization.

Q2: Can this dryer match our existing dry mortar plant?

A2: Yes. We can design the feeding height, discharging height, layout and capacity according to your existing production line, and support docking with conveyor, vibrating screen, sand storage silo and batching system.

Q3: Which heat source is more recommended for mortar factories?

A3: Natural gas is clean, convenient and low dust emission; biomass and coal are suitable for factories with low energy cost requirements. We will recommend the best solution according to your local energy price and environmental protection policy.

Q4: How long is the service life of the rotary drum dryer?

A4: The main drum body can serve more than 10 years under standard maintenance. The wearing parts such as lifting plates are consumables and can be replaced separately. We provide spare parts list and after-sales technical guidance.

Q5: Is the dust removal system included in the standard set?

A5: The main dryer does not include dust collector by default. We can support matched cyclone separator + pulse bag dust removal system as an optional package to meet local environmental emission requirements.

Q6: Can we adjust the output moisture during production?

A6: Yes. Adjust the feeding speed, drum rotation speed and hot air temperature through the PLC control cabinet to change the residence time and heat exchange condition of materials, so as to adjust the discharge moisture.

Overall Rating
5.0
Based on 50 reviews recently
Rating Snapshot
5
100%
4
0
3
0
2
0
1
0
All Reviews
W
w*a from Bahamas
Sep 17.2026
This 10-15TPH rotary sand dryer from QingChi works great for our dry mortar line! Three-pass design delivers good drying effect, sand moisture is stable after drying. ISO & CE certified, multiple payment options available. Reliable heavy-duty equipment.
V
v*a from Suriname
Sep 7.2026
Solid industrial rotary dryer, well suited for drying river sand and quartz sand. Robust structure, low failure rate. Communication with the supplier was smooth, and after-sales support is responsive. Highly recommended for dry mortar projects.
S
s*e from Solomon Islands
Jun 28.2026
We have run the QC3000 rotary dryer for several months. High capacity, low heat loss, stable operation. The technical team gave us professional guidance on installation and commissioning. Very satisfied with this purchase!