1. Product Introduction We are professional drum dryer manufacturers dedicated to dry-mix mortar equipment. This rotary drum dryer is specially developed as the core drying equipment for dry mortar production lines. It is mainly used to remove moisture from river sand, manufactured sand, quartz sand...
drum dryer for dry mortar
,industrial drum dryer equipment
,dry mortar line drum dryer
We are professional drum dryer manufacturers dedicated to dry-mix mortar equipment. This rotary drum dryer is specially developed as the core drying equipment for dry mortar production lines. It is mainly used to remove moisture from river sand, manufactured sand, quartz sand, slag, fly ash and other mortar aggregates. The equipment can stably control the final moisture of dried sand at 0.5%–1%, effectively solving quality problems including unstable mortar ratio, material caking and insufficient mortar strength caused by high and fluctuating raw sand moisture. Adopting continuous heat exchange drying principle, the inclined rotating cylinder with built-in lifting plates evenly disperses wet materials to form material curtain for sufficient heat exchange with hot flue gas. It can be perfectly connected with batching system, mixing machine, conveying and dust removal equipment to form a complete dry mortar production line. We support customized design according to customer’s production capacity and site conditions, and provide full-process engineering supporting services.
- Precise moisture control for mortar quality: Outlet moisture adjustable within 0.5%–1%, preventing mortar segregation, color difference, bag bulging and unstable open time.
- High-efficiency energy-saving design: Optional triple-pass nested drum structure with high heat utilization rate. Compatible with natural gas, diesel, coal, biomass and other heat sources to fit different energy conditions.
- Wear-resistant and durable structure: Lifting plates and inner lining adopt high-temperature wear-resistant steel plates, specially optimized for abrasive mortar sand, extending service life of vulnerable parts and reducing maintenance frequency.
- Flexible capacity matching: Capacity range from 5t/h to 100t/h, suitable for small automatic workshops and large intelligent dry mortar plants, compact structure and small footprint.
- Eco-friendly dust control: Matched with cyclone dust collector and pulse bag dust removal system, closed feeding and discharging design, low dust emission to meet environmental standards.
- Full-line supporting capability: Not only supply single dryer, but also provide complete dry mortar production line solutions including silos, conveyors, mixers, packing machines and electric control system, with installation guidance and after-sales technical support.
| Model | Capacity (t/h) | Inlet Moisture | Outlet Moisture | Applicable Heat Source |
|---|---|---|---|---|
| Φ1.5×12 | 5–8 | ≤15% | 0.5–1% | Gas / Oil / Coal |
| Φ2.0×14 | 10–18 | ≤15% | 0.5–1% | Gas / Oil / Coal |
| Φ2.5×16 | 20–35 | ≤15% | 0.5–1% | Gas / Oil / Coal |
| Triple-pass 2.6×7 | 25–40 | ≤15% | 0.5–1% | Gas / Oil / Coal |
- Check fasteners, reducer lubricating oil, motor and burner before startup; no foreign objects inside the drum.
- Start the supporting dust removal system first, then start the main drum dryer, and feed materials after the temperature reaches the set value.
- Do not feed materials with excessive lump, impurities or over-high moisture beyond the designed range, to avoid blockage.
- Adjust feeding speed, drum rotation speed and heating temperature slowly. Do not change parameters sharply to prevent abnormal moisture or overheating.
- Regularly inspect lifting plates, sealing parts and wearing components; replace damaged parts in time.
- Stop feeding first when shutting down, keep the drum running for a period until materials inside are completely discharged, then cut off heating and power supply.
- Strictly follow fire and explosion prevention requirements for fuel systems; keep the working area well ventilated.
- Operators must receive professional training before operating the equipment.
- Drying aggregate sand for dry-mix mortar: tile adhesive, putty powder, masonry mortar, plastering mortar, self-leveling mortar, repair mortar.
- Dehydration of manufactured sand, river sand, quartz sand, slag, fly ash and other building aggregates.
- Supporting drying equipment for dry mortar plants, building material factories, gypsum and cement auxiliary material production lines.
Q1: Can this drum dryer control sand moisture stably for dry mortar?
A1: Yes. This model is optimized for dry mortar process. The outlet moisture can be steadily controlled at 0.5%–1% by adjusting working parameters, which meets the formula requirement of most dry mix mortar products.
Q2: What heat sources can be selected?
A2: It supports natural gas, diesel, coal and biomass. We will recommend the most suitable heating solution according to your local fuel price and supply situation.
Q3: Can you customize the capacity and size?
A3: Sure. We can design the drum dryer and the whole mortar production layout according to your target output, raw material condition and plant space.
Q4: What after-sales service do you provide?
A4: We provide one-year warranty for the main machine, lifetime technical consultation, overseas installation guidance, commissioning and operator training. We can also supply layout drawings, foundation drawings and process flow charts.
Q5: Is the dryer easy to block?
A5: The internal structure and lifting plate design are optimized for sand materials. As long as feeding moisture and particle size are within the designed range and maintained regularly, blockage rarely happens.
Q6: Can you supply the complete dry mortar production line together with the drum dryer?
A6: Yes. We are an integrated supplier of dry mortar equipment. We can provide silos, screw conveyors, bucket elevators, mixers, packing machines and electric control system as a complete set.