NE30 Universal Industries Bucket Elevator Stainless Steel Inclined Bucket Elevator

NE30 Bucket Elevator is a medium-capacity, heavy-duty plate chain vertical lifting equipment in the standard NE series, designed and optimized for large and medium-sized dry mortar production lines. Adopting mature inflow feeding and gravity automatic unloading technology, this equipment is specially used for continuous vertical conveying of powdery, granular and small lump bulk materials such as cement, quartz sand, mineral powder and aggregate.

Compared with the small-sized NE15 model, NE30 features larger conveying capacity, stronger bearing capacity and more stable heavy-load operation. It adopts thickened high-strength alloy steel plate chain, enhanced wear-resistant buckets and heavy-duty hard-tooth surface reducer driving system. With fully enclosed dust-proof structure, low-speed stable operation and zero material backflow, it perfectly matches the high-yield continuous production demand of standard dry mortar production lines, solving the problems of insufficient feeding capacity and unstable operation of small elevators in medium and large production projects.

• Large Conveying Capacity & High Production Efficiency

  Designed with upgraded bucket volume and optimized chain speed, the theoretical conveying capacity reaches 30m³/h, which is twice that of NE15 model. It realizes continuous and uniform high-volume feeding, fully meeting the supporting operation requirements of medium and large automated dry mortar production lines and greatly improving overall production efficiency.

• Gravity Discharging Design & Zero Material Backflow

  Adopting inflow feeding and gravity induced unloading principle, the equipment runs stably at low speed without material throwing, scattering and backflow. It avoids material circulation loss, ensures stable and consistent feeding volume for downstream batching and mixing systems, and guarantees accurate proportioning of mortar products.

• Reinforced Heavy-duty Structure & Long Service Life

  Equipped with thickened alloy steel plate chain, reinforced stamping buckets and integral thickened casing, the whole machine has high tensile resistance, impact resistance and abrasion resistance. The core wearing parts are durable, with failure-free operation time up to 35,000 hours, adapting to long-term uninterrupted heavy-load production.

• Low Energy Consumption & Stable Heavy-load Operation

  Optimized transmission structure reduces operating resistance and invalid power consumption. Under the same conveying volume, the energy consumption is 35% lower than that of traditional ring-chain elevators. The heavy-duty reducer provides stable power output with strong overload resistance, effectively avoiding shutdown failure caused by instantaneous material surge.

• Fully Enclosed Dust-free & Eco-friendly Operation

  The overall fully sealed casing is equipped with standard dust removal interfaces, realizing zero dust overflow and zero material leakage during operation. It complies with national environmental protection production standards, keeps the workshop clean and dust-free, and is suitable for standardized and green dry mortar production workshops.

• Strong Adaptability & Wide Application Range

  It can stably convey low and medium abrasive materials such as powder, granules and small blocks, with a maximum tolerant material temperature of 200℃. It is not only suitable for various dry mortar raw material lifting, but also widely applicable for building materials, chemical, mining and grain conveying scenarios.

• Convenient Maintenance & Low Comprehensive Cost

  The equipment has a mature and simplified structural design with fewer vulnerable parts. Daily maintenance only includes regular lubrication, chain tension inspection and residual material cleaning. It supports long-term unattended operation, effectively reducing later maintenance labor cost and downtime loss.

NE30 is a medium-capacity plate chain bucket elevator, professionally customized for standard medium and large dry mortar production lines with authoritative and stable parameters:

1. Pre-operation Inspection

   Before startup, comprehensively check the tightness and wear degree of the plate chain and reinforced buckets to ensure no looseness, deformation, crack or damage. Inspect all sealing plates, access doors and dust removal interfaces to confirm complete sealing without gaps. Check the lubrication level of the heavy-duty reducer and bearing components, and clean all foreign matters inside the machine cavity to avoid jamming failure.

2. Standard Startup & Shutdown Sequence

   Strictly follow no-load startup specifications: start the elevator first and wait for stable operation before feeding materials. During shutdown, stop feeding first, and shut down the equipment only after all internal materials are completely discharged. Prohibit full-load startup and sudden shutdown to prevent motor overload, chain stuck and equipment damage.

3. Standard Feeding Operation

   Maintain uniform and continuous feeding to avoid instantaneous overload feeding and material accumulation blockage. Strictly block super-large hard foreign matters from entering the machine to prevent bucket collision, chain deformation and mechanical failure. Do not convey materials exceeding the rated temperature limit to avoid thermal deformation of chain and casing.

4. Daily Maintenance & Lubrication Management

   Regularly detect the chain tension and adjust the tension synchronously on both sides to ensure balanced and stable operation. Perform regular lubrication maintenance on transmission chain, bearings and reducer according to the operating cycle. Timely clean residual materials and caking dust inside the equipment to avoid affecting conveying efficiency and material quality.

5. Safety Protection & Fault Handling

   Equip matched anti-reversal, overload and anti-blocking protection devices. Completely cut off the power supply and hang warning signs during equipment maintenance and overhaul. It is forbidden to open the machine cover or touch internal operating parts during operation. Timely handle chain deviation, bucket wear and material blockage to avoid secondary equipment failure.

• Medium & Large Dry Mortar Production Lines

  It is the core supporting lifting equipment for standard large-scale production lines of thermal insulation mortar, self-leveling mortar, wear-resistant floor mortar and masonry mortar. It is used for continuous vertical lifting of cement, quartz sand, mineral powder and other bulk raw materials to support high-yield automated batching and production.

• Building Material & Powder Processing Industry

  Suitable for large-volume conveying of fly ash, lime powder, talc powder, heavy calcium powder and various building aggregates, widely used in standardized building material factories and large powder processing workshops.

• Chemical & Industrial Bulk Material Conveying

  Applicable for vertical lifting of granular and powdery chemical raw materials, fertilizer raw materials and industrial auxiliary materials. The fully sealed structure meets the dust-free and clean production requirements of chemical industry.

• Mining & Metallurgy Industry

  Adapt to medium abrasive small-particle mineral materials and metallurgical auxiliary materials, used for continuous vertical lifting of mine raw materials and processed materials, with strong heavy-load resistance and stable operation.

• Grain & Large-scale Feed Processing

  Suitable for high-volume lifting of grain particles, feed granules and auxiliary materials, with low material breakage rate and stable conveying performance, meeting the continuous production demand of large processing plants.