pouch feeder machine

The Pouch Feeder Machine is a dedicated automatic feeding device designed for dry mortar production lines. It is mainly used for automatic unpacking, crushing and continuous feeding of small packaged additives, including anti-cracking agents, waterproof powders, thickeners, early-strength agents and other micro-ingredients. Replacing traditional manual bag breaking and feeding, this machine realizes sealed, dust-free and standardized automatic feeding. It perfectly matches mortar mixers and upstream and downstream equipment, effectively improving batching accuracy, reducing labor costs and ensuring stable and consistent finished mortar quality.

• Fully Automatic Operation & Labor Saving

  It completes automatic bag breaking, material screening and continuous feeding without manual unpacking. It greatly reduces labor input, eliminates human feeding errors and improves overall production efficiency.

• Closed Dust-Free Structure & Eco-Friendly

  Full sealed body with negative pressure dust removal system prevents powder overflow. It solves the serious dust pollution caused by traditional manual feeding and meets modern environmental protection production standards for mortar factories.

• High Feeding Accuracy & Stable Quality

  Equipped with PLC frequency conversion speed regulation system, it ensures uniform and stable micro-additive feeding. Accurate proportioning effectively avoids mortar quality fluctuation and improves product qualification rate.

• Wide Material Compatibility

  Applicable to all kinds of small-package powdery and granular mortar additives. It supports multi-formula switching and is widely used for tile adhesive, waterproof mortar, thermal insulation mortar and putty powder production.

• Compact Structure & Easy Installation

  Modular integrated design covers small floor area. It can be quickly connected to new or existing dry mortar production lines without complicated civil engineering transformation.

• Low Failure Rate & Easy Maintenance

  Reasonable mechanical structure with wear-resistant and anti-blocking design. Few vulnerable parts, stable long-term operation and low daily maintenance cost.

• Intelligent Linkage Control

  It supports synchronous linkage with the main mortar production line, automatically adjusting feeding speed according to mixer operation to realize unattended automatic production.

• Inspect the sealing condition, cutter parts, transmission system and dust removal device before startup to ensure no blockage, damage or loose parts.
• Start the machine under no-load condition first and run stably for several minutes before feeding. Load startup is strictly prohibited.
• Prohibit hard foreign objects from entering the feeding bin to avoid cutter damage and equipment jamming.
• Keep uniform feeding volume; avoid overfeeding which may cause material blockage and overload operation.
• Do not modify frequency and feeding parameters arbitrarily during operation. Adjust parameters according to production formula requirements.
• Regularly clean residual powder in the bin, pipeline and dust filter cartridge to maintain feeding efficiency and dust removal effect.
• Regularly lubricate transmission components and check wearing parts; replace aging and damaged parts in time.
• Stop feeding first when shutting down. Run no-load for 2–3 minutes to empty internal materials before power off.
• Cut off the total power supply during maintenance and cleaning. It is forbidden to open the machine cover during operation.
• Keep the workshop dry and ventilated, and inspect electrical and control systems regularly to ensure stable linkage operation.

• Automatic additive feeding for full-automatic and semi-automatic dry mortar production lines
• Micro-ingredient batching for tile adhesive, waterproof mortar, anti-cracking mortar and thermal insulation mortar
• Dust-free automatic feeding for small-package powder materials in building material workshops
• Intelligent renovation and labor-saving upgrade of traditional manual feeding stations
• High-precision batching production of special mortar and customized mortar formulas
• Clean and environmentally friendly production supporting equipment for standard mortar factories

• Q1: What materials can this machine feed?
  A1: It is suitable for all kinds of small-package powdery and granular mortar additives, such as waterproof powder, anti-cracking powder, thickener and early strength agent, covering most micro raw materials for dry mortar production.
• Q2: Does the machine produce dust during operation?
  A2: No. The fully sealed body matched with negative pressure dust removal system realizes almost zero dust overflow, meeting environmental protection requirements and improving workshop working conditions.
• Q3: How is the feeding accuracy?
  A3: With PLC frequency conversion quantitative control, the feeding accuracy is stable within ±0.2%–±0.5%, ensuring uniform additive proportioning and stable mortar quality.
• Q4: Is the machine easy to block?
  A4: The optimized anti-blocking bin and material guiding structure ensure smooth discharging. Blockage rarely occurs with standard feeding and dry qualified materials.
• Q5: What are the advantages compared with manual feeding?
  A5: It realizes full automation, saves labor cost, avoids manual proportioning errors, ensures consistent product quality, and achieves dust-free and environmentally friendly production.
• Q6: Can it be matched with existing mortar production lines?
  A6: Yes. It supports seamless linkage with all types of dry mortar mixing systems, realizing synchronous automatic feeding and integrated production.
• Q7: Is daily maintenance complicated?
  A7: The machine has a simple and reliable structure with few vulnerable parts. Daily work only includes cleaning residual powder and routine inspection, with low maintenance cost and easy operation.