1. Product Introduction The industrial paddle mixer is a core horizontal mixing equipment specially optimized for full-automatic dry and wet mortar production lines. Adopting advanced twin-shaft counter-rotating weightless mixing technology, this equipment breaks the mixing dead zone of traditional ...
industrial paddle mixer for dry mortar
,heavy duty paddle mixer
,dry mortar paddle mixer
The industrial paddle mixer is a core horizontal mixing equipment specially optimized for full-automatic dry and wet mortar production lines. Adopting advanced twin-shaft counter-rotating weightless mixing technology, this equipment breaks the mixing dead zone of traditional mixing devices. Through the staggered angle paddle structure, it forms a continuous fluidized weightless layer inside the mixing chamber, realizing rapid convection, tumbling and homogenization of mortar raw materials such as cement, sand, gypsum, powder additives and fiber materials.
Different from ordinary ribbon mixers, the industrial paddle mixer features non-segregation mixing performance, which can perfectly adapt to mortar formulas with large differences in particle size, specific gravity and viscosity. It supports integrated continuous production from raw material batching, mixing homogenization to rapid discharging. With fully enclosed structure, intelligent control and low energy consumption design, it has become the mainstream supporting equipment for high-efficiency, low-cost and stable production of commercial dry mortar, wet mixed mortar and special functional mortar, widely used in standardized mortar production factories worldwide.
Equipped with scientifically arranged 3D turbulent reverse paddles, the equipment realizes 360° full-chamber circulating mixing. The unique weightless fluidized mixing principle avoids material stratification, agglomeration and segregation. The mixing uniformity reaches over 98%, ensuring stable content of each component of mortar, consistent dry density and bonding strength of finished products, and effectively solving the quality problems of uneven color, unstable performance and poor construction consistency of traditional mortar.
The optimized paddle rotation speed and material throwing track shorten the single-batch mixing cycle to 3–5 minutes, with hourly production capacity covering 10–50 tons. It supports one-time feeding of multiple raw materials and full-process closed mixing, eliminating repeated material transfer and secondary processing procedures. It saves labor costs, material loss and auxiliary equipment investment, and significantly improves the overall operational efficiency of the mortar production line.
Core components including mixing paddles and mixing cylinder are made of high-strength wear-resistant carbon steel or customized stainless steel. The thickened paddle structure resists long-term friction and impact of granular mortar materials, extending the service life of vulnerable parts. The optimized transmission gear set and pure copper motor ensure stable power output, 24-hour continuous industrial operation support, and greatly reduce equipment downtime and maintenance costs.
The whole machine adopts fully enclosed sealing design, with professional sealing structure at the driving shaft end and discharging port to prevent dust leakage and material overflow. Equipped with matching dust removal system, the dust removal rate is higher than 99%, meeting industrial environmental protection emission standards. The closed production mode also avoids external impurity pollution, ensuring high purity of mortar finished products.
Supporting PLC intelligent automatic control, the equipment can store multiple sets of mortar mixing formulas, realize precise control of mixing time, rotating speed and feeding proportion, and reduce manual operation errors. It features compact overall structure, small floor area, and strong compatibility, which can be perfectly matched with new mortar production lines and old production line renovation projects, supporting customized production of various ordinary and special mortars.
The industrial paddle mixer covers full-range models from laboratory test type to industrial large-scale mass production type, with unified industrial standard parameters as follows:
| Parameter | Value |
|---|---|
| Working Mode | Horizontal twin-shaft counter-rotating weightless mixing |
| Single Batch Capacity | 100L–12000L (customizable) |
| Hourly Output | 10–50 tons/hour |
| Mixing Power | 11kW–18.5kW (variable according to model) |
| Single Batch Cycle | 3–5 minutes |
| Mixing Uniformity | ≥98% |
| Main Material | Carbon steel / 304 stainless steel (optional) |
| Discharging Mode | Pneumatic large-opening rapid discharging |
| Control System | PLC full automatic intelligent control |
| Overall Dimension | 3.5m*1.36m*2.5m (standard model) |
| Dust Removal Standard | Industrial high-efficiency dust removal, dust emission ≤ national standard |
Before starting the equipment, check the tightness of all connecting bolts, the flexibility of transmission parts and the sealing performance of the shaft end and discharging port. Confirm that there is no foreign matter inside the mixing chamber, the motor and circuit system are normal, and the pneumatic control device operates stably. It is forbidden to start the machine with load to avoid equipment stuck and motor burnout.
Feed materials in strict accordance with the formula proportion, and prohibit overloading operation beyond the rated capacity. During the mixing process, do not open the sealing cover or reach into the mixing chamber to avoid safety accidents. For mortar containing fiber additives, control the mixing speed reasonably to ensure uniform fiber dispersion without fiber breakage. Strictly follow the set mixing cycle to avoid insufficient mixing or over-mixing affecting mortar quality.
After daily production, clean the residual mortar materials inside the mixing chamber thoroughly to prevent material caking from affecting subsequent mixing accuracy. Regularly lubricate the transmission bearing and gear set every 7–10 days to ensure flexible operation. Inspect the wear degree of paddles regularly, and replace vulnerable parts in time when serious wear is found to guarantee mixing efficiency.
The equipment must be grounded reliably during operation. Regularly check the dust removal system to ensure normal dust absorption and avoid dust accumulation. When the equipment fails, stop the machine and cut off the power supply completely before maintenance. It is forbidden to disassemble parts and adjust parameters during operation. For long-term shutdown, keep the inside of the mixing chamber dry and clean to prevent rust and corrosion.
This industrial paddle mixer is highly adaptable and widely applicable to full-scene production of various dry-mixed and wet-mixed mortars, covering construction, decoration, infrastructure and other fields:
- Ordinary Construction Mortar: Masonry mortar, plastering mortar, waterproof mortar, thermal insulation mortar, crack-resistant mortar
- Special Decoration Mortar: Tile adhesive, floor self-leveling mortar, interface agent, putty powder, decorative colored mortar
- Functional Engineering Mortar: Repair mortar, anticorrosive mortar, fireproof mortar, high-strength structural mortar
- Supporting Production Scenarios: Standardized dry mortar production lines, small and medium-sized mortar processing plants, engineering on-site mortar batching production, new mortar formula research and development and trial production
Different from the folding mixing mode of ribbon mixers, the paddle mixer adopts weightless fluidized mixing, which can eliminate mixing dead zones and avoid material segregation. It has better mixing effect on mortar containing fibers, heavy aggregates and trace additives, with higher uniformity and faster speed. Meanwhile, it features more wear resistance, lower failure rate and longer service life, which is more suitable for long-term continuous industrial production of high-standard mortar.
The main reasons include insufficient mixing time, uneven feeding proportion, serious wear of paddles leading to dead mixing zones, or residual caking materials in the chamber affecting new batch mixing. It is recommended to strictly implement formula parameters, regularly clean the equipment and check the wear of vulnerable parts to ensure uniform mixing of each batch of materials.
Yes. The industrial paddle mixer is matched with automatic batching system, conveying system, dust removal system and packaging system to form a fully automatic integrated mortar production line. It can realize unmanned automatic operation from feeding, mixing, discharging to packaging, effectively improving production efficiency and reducing manual errors.
The equipment adopts full closed sealing and professional shaft end sealing technology with zero leakage design. Equipped with a supporting high-efficiency dust remover, it can completely absorb floating dust generated in the production process. Regular inspection of sealing strips and dust removal equipment can fundamentally solve the dust leakage problem and meet environmental protection production standards.
Absolutely. We support personalized customization of equipment capacity, material configuration, explosion-proof structure, heating and drying modules and intelligent system functions. It can be adapted to high-viscosity mortar, fiber-containing mortar, corrosion-resistant mortar and other special formula production, meeting the differentiated production needs of different customers.
Daily cleaning of residual materials is required after shutdown. Lubricate transmission parts every 7–10 days. Conduct a comprehensive inspection of paddles, seals, motors and circuits every month. Replace severely worn vulnerable parts quarterly to ensure long-term stable and efficient operation of the equipment.
